A comparison between transforaminal lumbar epidural injection performed under picture archiving and communication systems-based magnetic resonance imaging planning and injection under immediate X-ray guidance.

OBJECTIVES: The study aimed to compare the treatment cost, operation time, clinical effect, and complications between punctures done under magnetic resonance imaging (MRI) planning based on picture archiving and communication systems (PACS) and punctures done under immediate X-ray fluoroscopy guidance in the treatment of lumbar disc herniation by transforaminal lumbar epidural injection. PATIENTS AND METHODS: In this prospective study conducted between October 2016 and June 2021, 128 patients were randomly divided into Groups A and B by the random number table method. In Group A (n=66; 36 males, 30 females; mean age: 64.5±2.4 years, range, 50 to 72 years), puncture was performed by planning with PACS-based MRI; in Group B (n=62; 34 males, 28 females; mean age: 65.3±2.6 years; range, 48 to 73 years), puncture was performed under immediate X-ray guidance. The cost of treatment, duration of procedure, clinical outcome, and complications were compared between the two groups. RESULTS: The difference in treatment cost in Groups A and B was statistically significant (p<0.001), with 755.67±29.45 yuan and 1.158.08±43.92 yuan, respectively. The mean treatment time was statistically significant (p<0.001) between the groups, with 21.16±1.91 min in Group A and 37.26±2 min in Group B. However, there was no significant difference between Group A and Group B in terms of improvement in pain scores and Oswestry disability index (both p>0.05). There was also no significant difference between Group A and Group B in terms of complication rates (both p>0.05). CONCLUSION: Compared to immediate X-ray guided puncture, the puncture method using PACS for MRI planning shortened the transforaminal lumbar epidural injection procedure time and reduced the treatment costs without exposing the physician or patient to additional radiation, while there was no significant difference in the short-term clinical outcome or complication rate.

Degradation of internal fixation materials based on antibacterial and absorbable silk containing different gentamicin concentrations.

Adding gentamicin to silk fibroin enhances both the antibacterial performance and degradation rate of silk-based materials. The increased material degradation rate can affect the strength of early internal fixation, resulting in internal fixation failure. This study sought to adjust the gentamicin concentration to control the material degradation rate, thereby better meeting clinical application requirements. The in vitro degradation, water absorption rate, and expansion rate of silk-based materials containing different gentamicin concentrations were studied. A gentamicin-loaded silk-based screw was implanted into the femurs of New Zealand rabbits. Micro-computed tomography was used to measure the screw diameter, which was then used to calculate the degradation rate. The specimens were stained with hematoxylin and eosin and Masson's trichrome. The in vitro results revealed increasing material degradation rates with increasing gentamicin concentration but no significant differences in water absorption rates with different gentamicin concentrations. The degradation rates of gentamicin-loaded (4 mg/g) silk-based rod-like materials were approximately 11.08% at three months in vitro and 9.4% in the animal experiment. The time for complete degradation was predicted from the fitting curve to be approximately 16 months. No inflammatory hyperplasia was observed in bone or soft tissue. The degradation and biocompatibility of the material containing 4 mg/g gentamicin meet clinical application requirements, and previous experimental results demonstrate good antibacterial performance of materials containing this gentamicin concentration.

Streptococcus gordonii finger infection: Case report and a review of the literature.

RATIONALE: Streptococcus gordonii is a rare cause of finger suppurative infection. Very few cases have been reported of its treatment. PATIENT CONCERNS: A 68-year-old male of severe finger infection. Bacterial culture of synovial fluid revealed S gordonii.According to the patient's history and auxiliary examination, the patient was diagnosed with S gordonii infection. Here, we review the diagnosis and treatment of this patient and describe the clinical and epidemiological characteristics of the patient. DIAGNOSES: Streptococcus gordonii finger infection.Interventions: In the case of ineffective oral antibiotics, this patient chose to pursue an abscess incision, but in the course of treatment,the flexor digitorum tendon dissolved and eventually ruptured. OUTCOMES: The infection was controlled after intravenous injection of vancomycin. The incision was sutured 2 weeks later. No recurrence of infection was found after 3 months of follow-up. LESSONS: The treatment included antibacterial and abscess treatments. In the absence of drug sensitivity results, antibiotics can be used empirically. If empirical anti-microbial treatment fails, the antibiotic regimen should be changed in a timely manner, Vancomycin may be an antibiotic choice.

Pseudotear Sign of the Anterior Horn of the Meniscus.

PURPOSE: To observe the morphology of the transverse geniculate ligament of the knee (TGL) by magnetic resonance imaging (MRI) and to analyze the cause of the pseudotear sign of the anterior horn of the meniscus caused by the TGL. METHODS: Patients who underwent MRI examination of the knee joint in the orthopaedics department of our hospital from July 2016 to August 2019 were identified. The occurrence rate, length, width, thickness, cross-sectional shape, pattern, appearance, and position relative to the anterior horn of the lateral and medial meniscus and anatomical variations were observed by multiplane and multisequence MRI. The frequency and cause of the pseudotear sign also were observed. RESULTS: The data of 101 patients were analyzed. Among them, 60 were male, and 41 were female. The average age was 42.01 (18-75) years. The occurrence rate of the TGL was 67.3% (68/101), the average length was 38.75 ± 3.56 mm, the median coronal diameter was 1.79 ± 0.60 mm, the median sagittal diameter was 1.88 ± 0.35 mm, and the cross-sectional morphology was mostly oval and round. There were 5 types of TGL connection to the anterior horn of the medial meniscus: type 1, located at the front edge; type 2, located at the upper front edge; type 3, located at the upper edge; type 4, located at the back upper edge; and type 5, was located at the back edge of the anterior horn of the medial meniscus. There was only one type of TGL insertion into the anterior horn of the lateral meniscus, located at the anterior superior edge of the anterior horn of the lateral meniscus. There were 4 cases of the pseudotear sign in the anterior horn of the meniscus, 3 in the lateral meniscus and 1 in the medial meniscus. The pseudotear sign of the anterior horn of the meniscus caused by the TGL was observed at a rate of 5.88% (4/68). CONCLUSIONS: In MRI examination of the knee, the anterior horn of the meniscus sometimes shows a pseudotear sign. According to the shape and route of the TGL on MRI and the direction and position of the pseudotear sign of the anterior horn of the meniscus, true and false tears of the anterior horn of the meniscus can be identified. LEVEL OF EVIDENCE: Level III, diagnostic study (retrospective, noncomparative, observational case series without a consistently applied reference "gold" standard).

Preparation and application of chitosan biomaterials in dentistry.

Chitosan is a biodegradable and biocompatible natural polysaccharide that has a wide range of applications in the field of dentistry due to its functional versatility and ease of access. Recent studies find that chitosan and its derivatives can be embedded in materials for dental adhesives, barrier membranes, bone replacement, tissue regeneration, and antimicrobial agent to better manage oral diseases. In this paper, we provide a comprehensive overview on the preparation, applications, and major breakthroughs of chitosan biomaterials. Furthermore, incorporation of chitosan additives for the modification and improvement of dental materials has been discussed in depth to promote more advanced chitosan-related research in the future.

Construction of Biomimetic Natural Wood Hierarchical Porous-Structure Bioceramic with Micro/Nanowhisker Coating to Modulate Cellular Behavior and Osteoinductive Activity.

Scaffolds with a biomimetic hierarchy micro/nanoscale pores play an important role in bone tissue regeneration. In this study, multilevel porous calcium phosphate (CaP) bioceramic orthopedic implants were constructed to mimic the micro/nanostructural hierarchy in natural wood. The biomimetic hierarchical porous scaffolds were fabricated by combining three-dimensional (3D) printing technology and hydrothermal treatment. The first-level macropores (∼100-600 µm) for promoting bone tissue ingrowth were precisely designed using a set of 3D printing parameters. The second-level micro/nanoscale pores (∼100-10,000 nm) in the scaffolds were obtained by hydrothermal treatment to promote nutrient/metabolite transportation. Micro- and nanoscale-sized pores in the scaffolds were recognized as in situ formation of whiskers, where the shape, diameter, and length of whiskers were modulated by adjusting the components of calcium phosphate ceramics and hydrothermal treatment parameters. These biomimetic natural wood-like hierarchical structured scaffolds demonstrated unique physical and biological properties. Hydrophilicity and the protein adsorption rate were characterized in these scaffolds. In vitro studies have identified micro/nanowhisker coating as potent modulators of cellular behavior through the onset of focal adhesion formation. In addition, histological results indicate that biomimetic scaffolds with porous natural wood hierarchical pores exhibited good osteoinductive activity. In conclusion, these findings combined suggested that micro/nanowhisker coating is a critical factor to modulate cellular behavior and osteoinductive activity.

Transforaminal debridement with a posterior-only approach involving placement of an interbody bone graft combined with diseased vertebral fixation for the treatment of thoracic and lumbar tuberculosis: Minimum 5-year follow-up.

The aim of this study was to evaluate the clinical and imaging results of transforaminal debridement with a posterior-only approach involving placement of an interbody bone graft combined with diseased vertebral fixation for the treatment of thoracic and lumbar tuberculosis (TB) with a minimum 5-year follow-up.Sixty-five patients who presented with active thoracic and lumbar TB between October 2006 and August 2013 were retrospectively analyzed: 20 were thoracic TB (group A), 17 were thoracolumbar TB (group B), and 28 were lumbar TB (group C). The patient data, operating time, blood loss, Visual Analog Scale score, Oswestry Disability Index score, correction of kyphosis, recovery of neurological function, and complications were recorded and analyzed.The patients were followed for 68.7 ±â€Š17.8 months. The preoperative average Cobb angles of kyphosis in patients in groups A, B, and C significantly decreased from 28.2 ±â€Š11.9°, 30.5 ±â€Š16.9°, and 10.9 ±â€Š8.8° before surgery to 8.0 ±â€Š5.4°, 5.0 ±â€Š4.1°, and -4.4 ±â€Š1.6° (- indicates lordosis) after surgery, respectively. At the final follow-up time, the Cobb angles were 9.2 ±â€Š6.1°, 6.8 ±â€Š10.0°, and -3.7 ±â€Š2.0°, respectively. The postoperative Cobb angles of kyphosis were significantly improved in all groups (P < .05). The correction loss angles were larger in groups A and B than in group C (P > .05). The operating time, blood loss, and complications were not significantly different between the groups (P > .05). Three (4.6%) patients developed unhealed TB during postoperative anti-TB treatment, and 6 patients (9.2%) with TB relapsed after healing from surgery.The posterior-only approach for the surgical treatment of thoracic and lumbar TB achieved satisfactory outcomes over long-term follow-up. The implantation of pedicle screws in diseased vertebrae reduced the range of fixation, but patients with thoracic and thoracolumbar TB should undergo fixation to at least 1 adjacent normal segment. There were some cases of recurrence after TB healed, and long-term follow-up is therefore necessary.

PLA2G10 facilitates the cell-cycle progression of soft tissue leiomyosarcoma cells at least by elevating cyclin E1/CDK2 expression.

Soft tissue leiomyosarcoma (STLMS) is a major histological subtype of adult sarcoma. Although the molecular mechanisms ofLMS have been gradually revealed, no valid therapeutic targets have been identified. In this study, we performed a systematic screening to explore relapse-associated genes in STLMS, using data from The Cancer Genome Atlas-Sarcoma (TCGA-SARC). Then, we investigated the functional role of the gene with the best relapse-prediction value in STLMS by both in-vitro and in-vivo studies. Results showed that AMH and PLA2G10 were two genes with area under curve (AUC) values higher than 0.80 in ROC analysis when detecting relapse. Patients in the high AMH or PLA2G10 expression group had significantly worse relapse-free survival (RFS) compared to the respective low expression group. PLA2G10 was highly expressed in STLMS, but not in other sarcoma subtypes. PLA2G10 overexpression promoted SK-LMS-1 cell growth and G1/S transition, while PLA2G10 knockdown slowed the growth and resulted in G1 phase arrest. PLA2G10 overexpression markedly increased the expression of CDK2 and cyclin E1, but did not influence CDK4, CDK6, cyclin D1, CDK1 or cyclin A expression. PLA2G10 overexpression enhanced SK-LMS-1 cell-derived xenograft tumor growth in nude mice, while PLA2G10 inhibition slowed the growth. Mutation of two critical catalyzing amino acid residues (p.H88A and p.D89A) abrogated the capability of PLA2G10 to catalyze the production of arachidonic acid (AA), and also canceled the regulatory effects on cyclin E1 and CDK2 expression, as well as G1/S transition. In conclusion, PLA2G10 was a specific relapse-associated gene in STLMS. It facilitated the cell-cycle progression of STLMS cells at least by elevating the expression of cyclin E1 and CDK2. The hydrolytic activity was crucial for its oncogenic properties.

Can a posterior approach effectively heal thoracic and lumbar tuberculosis? Microbiology outcomes of the operative area.

BACKGROUND: There was a controversy about surgery approach of thoracic and lumbar tuberculosis (TB) treatment. The aim of this study was to compare the microbiology outcomes of the drainage liquid and the clinical outcomes of a posterior and anterior approach in the treatment of thoracic and lumbar TB. MATERIALS AND METHODS: A total of 105 patients were enrolled in this prospective study from February 2011 to September 2015. Patients were divided into two groups: group A (51 patients, posterior approach surgery) and group B (54 patients, anterior approach surgery). Intraoperative TB samples were sent for Mycobacterium tuberculosis culture (MTBC). Drainage fluid was postoperatively collected for polymerase chain reaction (PCR), acid-fast strains (AFS), MTBC, and DNA molecular detection (DNAMD) analyses. Compare the drainage liquid positive rate of the two groups and estimate relationship between the positive results of drainage fluid and the lesion region. In addition, the clinical outcomes including the bony fusion, relapse rate, complications, and neurological status were collected. RESULTS: There was no significant difference in the positive rate of AFS, PCR, DNAMD, MTBC, or any positive rate (APR) of drainage liquid between the two groups (P > 0.05). In both groups, the MTBC-positive rate of postoperative drainage fluid was significantly lower than that of the intraoperative sample (P < 0.01). There was no significant relationship between APR and the lesion region (P > 0.05). All the patients had at least 2 years of follow-up, with an average of 34.4 ± 15.8 months. There were four patients in group A and two patients in group B who had recurrent spine TB, and the rest of the patients had fusion in the surgical area. There was no significant difference in the incidence of TB recurrence or other complications between the two groups (P > 0.05). All the patients with neurological dysfunction had improved after surgery. CONCLUSION: Compared with anterior approach surgery, posterior approach surgery had equal effectiveness of debridement. The two kinds of surgery can effectively clear the lesions surrounding the spine and heal thoracic and lumbar TB.

Promotion of chondrogenic differentiation of mesenchymal stem cells by copper: Implications for new cartilage repair biomaterials.

Copper (Cu) has drawn considerable attention in the design of biomaterials due to its multifunction, such as antibacterial property, osteogenic and angiogenic ability. However, the effect of Cu on chondrogenic differentiation of mesenchymal stem cells (MSCs) and its potential for cartilage repair biomaterials has been rarely studied. Here, we report that Cu can significantly enhance chondrogensis of MSCs. Specifically, in vitro studies showed that Cu could promote MSCs cytoskeleton change, extracellular glycosaminoglycan (GAG) deposition and the chrodrogenic genes (Sox9, Aggrecan, and Col-2) up-regulation. Furthermore, we prepared a Cu-containing alginate (Alg) porous scaffold to assess the chondroinductivity of Cu in vivo. In eight weeks, we found that Alg/Cu scaffolds could induce better formation of new cartilage tissue compared to the pure Alg scaffolds fabricated by the same procedure but without adding Cu. These encouraging results indicate that Cu can bring considerable benefits to the development and application of cartilage repair biomaterials.

An antibacterial and absorbable silk-based fixation material with impressive mechanical properties and biocompatibility.

Implant-associated infections and non-absorbing materials are two important reasons for a second surgical procedure to remove internal fixation devices after an orthopedic internal fixation surgery. The objective of this study was to produce an antibacterial and absorbable fixation screw by adding gentamicin to silk-based materials. The antibacterial activity was assessed against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) in vitro by plate cultivation and scanning electron microscopy (SEM). We also investigated the properties, such as the mechanical features, swelling properties, biocompatibility and degradation, of gentamicin-loaded silk-based screws (GSS) in vitro. The GSS showed significant bactericidal effects against S. aureus and E. coli. The antibacterial activity remained high even after 4 weeks of immersion in protease solution. In addition, the GSS maintained the remarkable mechanical properties and excellent biocompatibility of pure silk-based screws (PSS). Interestingly, after gentamicin incorporation, the degradation rate and water-absorbing capacity increased and decreased, respectively. These GSS provide both impressive material properties and antibacterial activity and have great potential for use in orthopedic implants to reduce the incidence of second surgeries.

Imaging Anatomical Research on the Operative Windows of Oblique Lumbar Interbody Fusion.

To provide applied anatomical evidence of the preoperative assessment of oblique lumbar interbody fusion (OLIF), the anatomical parameters of the OLIF operative window were observed through computed tomography angiography (CTA). We selected imaging data from 60 adults (30 males, 30 females) who underwent abdominal CTA and T12-S1 vertebral computed tomography (CT) with three-dimensional reconstruction. The OLIF operative windows at the L1-2, L2-3, L3-4, L4-5 and L5-S1 levels were as follows: the vascular window, bare window, psoas major window, ideal operative window, and actual operative window. Each level's actual operative window was statistically analyzed based on an actual operative window of <1 cm and ≥1 cm. The vascular window was largest at L4-5 (1.72 ± 0.58 cm). The bare window was largest at L5-S1 (1.59 ± 0.93 cm) and smallest at L3-4 (1.37 ± 0.51 cm). The psoas major window was largest at L3-4 (1.14 ± 0.35 cm) and smallest at L1-2 (0.41 ± 0.34 cm). The ideal operative window was largest at L4-5 (3.74 ± 0.36 cm) and smallest at L1-2 (3.23 ± 0.30 cm). The actual operative window was largest at L3-4, followed by L2-3, L4-5, L1-2, and L5-S1, which were 2.51 ± 0.56 cm, 2.28 ± 0.54 cm, 2.01 ± 0.74 cm, 1.80 ± 0.45 cm and 1.59 ± 0.93 cm, respectively (P = 0.000), and the percentages of the actual surgical window were 69%, 66%, 53%, 56% and 43%, respectively. The actual surgical window was <1 cm in 2 cases at L1-2 (3.3%), 4 cases at L4-5 (6.7%), and 17 cases at L5-S1 (28.3%) (11 males and 6 females). The regional anatomy of each level related to OLIF has its own peculiarities, and not all levels are suitable for OLIF. Before OLIF surgery, surgeons should analyze the imaging anatomy and select the appropriate surgical procedures.

Biomechanical comparison of anterior lumbar screw-plate fixation versus posterior lumbar pedicle screw fixation.

Anterior lumbar interbody fusion (ALIF) followed by posterior pedicle screw fixation (PSF) in a second procedure is mostly used to implement lumbar spine fusion. ALIF followed by anterior lumbar screw-plate has a lot of advantages, but its biomechanical stability requires confirmation. This study evaluated the biomechanical stability of a novel anterior lumbar locked screw-plate (ALLSP) by comparison with posterior lumbar PSF. Twelve fresh human cadaveric lumbar specimens (L4-L5) were assigned to four groups: ALIF+PSF group, ALIF+ALLSP (both fixed) group, ALIF group and an untreated control (both non-fixed) group. The first three groups received implantation of a rectangular titanium cage. Tests under axial compression, flexion, extension, lateral bending, or rotation showed that the fixed groups had significantly stronger stability than the non-fixed groups (P=0.000 for all). The ALIF+ALLSP group had significantly greater axial stiffness under applied axial compression and significantly less angular displacement under rotational forces than the ALIF+PSF group. The angular displacement of the ALIF+ALLSP group was less under flexion than that of the ALIF+PSF, and the angular displacement under lateral bending and extension was greater, but these differences were not statistically significant. In summary, the ALLSP conforms to the anterior lumbar spine and has good biomechanical stability. It is a reliable choice for enhancing the stability of ALIF.

[Effectiveness of U-shape titanium screw-rod fixation system with bone autografting for lumbar spondylolysis of young adults].

OBJECTIVE: To investigate the effectiveness of U-shape titanium screw-rod fixation system with bone autografting for lumbar spondylolysis of young adults. METHODS: Between January 2008 and December 2011, 32 patients with lumbar spondylolysis underwent U-shape titanium screw-rod fixation system with bone autografting. All patients were male with an average age of 22 years (range, 19-32 years). The disease duration ranged from 3 to 24 months (mean, 14 months). L3 was involved in spondylolysis in 2 cases, L4 in 10 cases, and L5 in 20 cases. The preoperative visual analogue scale (VAS) and Oswestry disability index (ODI) scores were 8.0 +/- 1.1 and 75.3 +/- 11.2, respectively. RESULTS: The operation time was 80-120 minutes (mean, 85 minutes), and the blood loss was 150-250 mL (mean, 210 mL). Primary healing of incision was obtained in all patients without complications of infection and nerve symptom. Thirty-two patients were followed up 12-24 months (mean, 14 months). Low back pain was significantly alleviated after operation. The VAS and ODI scores at 3 months after operation were 1.0 +/- 0.5 and 17.6 +/- 3.4, respectively, showing significant differences when compared with preoperative ones (t = 30.523, P = 0.000; t = 45.312, P = 0.000). X-ray films and CT showed bone fusion in the area of isthmus defects, with the bone fusion time of 6-12 months (mean, 9 months). During follow-up, no secondary lumbar spondyloly, adjacent segment degeneration, or loosening or breaking of internal fixator was found. CONCLUSION: The U-shape titanium screw-rod fixation system with bone autografting is a reliable treatment for lumbar spondylolysis of young adults because of a high fusion rate, minimal invasive, and maximum retention of lumbar range of motion.

A posterior versus anterior surgical approach in combination with debridement, interbody autografting and instrumentation for thoracic and lumbar tuberculosis.

PURPOSE: The purpose of this study was to compare posterior and anterior surgical approach in combination with debridement, interbody autografting and instrumentation for thoracic and lumbar tuberculosis. These approaches were compared in terms of the operation duration, intraoperative blood loss, bony fusion, intraoperative and postoperative complications, neurological status and the angle of kyphosis. METHODS: Forty-seven patients with thoracic and lumbar tuberculosis who underwent either the posterior or the anterior approach in combination with debridement, interbody autografting and instrumentation from January 2004 to March 2010 were reviewed retrospectively. In group A (n = 25), the posterior approach was combined with debridement, interbody autografting and instrumentation. In group B (n = 22), the anterior approach was performed in addition to debridement, interbody autografting and instrumentation. RESULTS: All cases were followed up for 12-62 months. There was no statistically significant difference between groups in terms of the operation duration, intraoperative blood loss, bony fusion, intraoperative and postoperative complications, neurological status and the angle of kyphosis (p > 0.05). Good clinical outcomes were achieved in both groups. CONCLUSIONS: The posterior approach combined with debridement, interbody autografting and instrumentation is an alternative procedure to treat thoracic and lumbar tuberculosis. The posterior approach is sufficient for lesion debridement. In addition, the posterior approach can maintain spinal stabilisation and prevent loss of corrected vertebral alignment as effectively as the anterior approach.